My BIOS will not let me boot to the floppy drive.

To change the boot sequence in the Award Software BIOS:

1. Start the computer and press the Delete key during the memory
count.

2. In the BIOS CMOS setup utility program, highlight BIOS Features
and press Enter.

3. Highlight BOOT SEQUENCE C, A. (Note: you may see first boot device, second boot device etc.. set first boot device to floppy.)

4. Scroll using the Page Up or Page Down keys to change the boot sequence to A, C.

5. Press Esc.

6. Press F10.

7. Save and exit the CMOS Setup utility.