eSupport.com
 

My system halts at 'Verifying DMI Pool Data'

Back to Table of Contents


Enter the CMOS setup. Under the 'Bios Features Setup' screen, disable
the 'External Cache' or 'L2 Cache' setting. Save and exit.

If this does not resolve the issue reset External/L2 cache then enter "intergrated peripherals" find the 4 options for PIO mode set them all for mode 0

If the problem still persists reset PIO modes and set UDMA or Ultra DMA modes to disabled.

If none of these options resolve the issue contact tech support.